CorePure Demineralized Water
INDUSTRIAL | RELIABLE | COST-EFFICIENT
Reliable Controlled-Purity Water for Industrial & Everyday Technical Applications
CorePure is DTL Space’s industrial Demineralized Water grade, developed for applications requiring reliable low-mineral water without the unnecessary cost of higher-purity grades.
With controlled conductivity of 5 – 10 uS/cm, CorePure provides a practical water solution for battery maintenance, boilers, cooling systems, manufacturing, process applications and other compatible technical uses.
5 - 10 uS/cm | TDS <5 ppm | Industrial Purity
Available in: 4L | 10L | 25L | Bulk Supply
WHY COREPURE?
Industrial Purity Without Unnecessary Over-Specification
Many industrial applications require water with significantly reduced mineral content but do not require extremely low conductivity. Using a higher-purity product than the process requires can add unnecessary cost without providing a meaningful operational benefit.
CorePure is designed to solve that problem. It provides controlled Demineralized Water for practical technical and industrial applications where reduced hardness, mineral content and conductivity are important.
CorePure Is Built Around Four Priorities
CONTROLLED CONDUCTIVITY
Produced to a defined 5 - 10 uS/cm conductivity range
INDUSTRIAL VERSATILITY
Suitable for multiple compatible technical and industrial applications.
NIL HARDNESS
Minerals associated with water hardness are effectively removed through the treatment process.
COST-EFFECTIVE PURITY
Provides the required level of purity without paying for a higher specification your application may not need.
APPLICATION-FOCUSED
Developed for applications where higher water purity can contribute to better process control.
TECHNICAL SPECIFICATION
CorePure at a Glance
Product Type: Demineralized Water
Conductivity: < 5 – 10 uS/cm
Total Dissolved Solids (TDS): < 5 ppm
pH: 6.5 – 7.5 target specification
Silica: Trace: Trace
Hardness: Nil / Effectively Removed
Appearance: Clear, odorless
Packaging Option: 4L, 10L, 25L & Bulk
Actual batch values may vary within the defined product specification. Where a customer requires a specific parameter or tighter specification, this should be communicated before ordering.
RECOMMENDED APPLICATIONS
Built for Practical Industrial Performance
BATTERY MAINTENANCE
Suitable for compatible lead-acid battery maintenance and other battery applications requiring low-mineral water, subject to the battery manufacturer’s requirements.
BOILERS
Reduced mineral content can help limit the introduction of hardness-forming minerals into compatible boiler systems.
COOLING SYSTEMS
Suitable for compatible cooling and circulation systems requiring low-mineral make-up or process water.
MANUFACTURING
For production environments where reduced mineral content is required as part of a manufacturing process.
PROCESS WATER
Suitable as feed or process water where the required specification falls within the CorePure range.
TECHNICAL & EQUIPMENT USE
For compatible equipment and technical applications where tap-water mineral content is undesirable.
IMPORTANT APPLICATION GUIDANCE
Choose CorePure when:
Your application requires controlled Demineralized Water.
- A 5 – 10 uS/cm conductivity specification is sufficient.
- Reduced hardness and mineral content are important.
- You require water for general industrial or technical use.
- You want a cost-effective solution without unnecessary over-purification.
BUILT FOR BUSINESSES THAT NEED RELIABLE SUPPLY
CorePure is available for both individual purchases and recurring business requirements. For businesses requiring regular supply, provide us with:
- Application
- Required Volume
- Supply Frequency
- Delivery Location
Our team can assess your requirement and provide an appropriate supply quotation.
COREPURE VS OUR OTHER GRADES
Choose the Purity Your Application Actually Requires
CorePure
Controlled industrial purity
5 – 10 uS/cm
Best suited to general industrial, battery, boiler, cooling and process applications.
PrimePure
Enhanced technical purity
1 – 5 uS/cm
Suitable for laboratories, cosmetics, batteries and more demanding technical applications.
UltraPure
Advanced high purity
0.1 – 1.0 uS/cm
Our highest-purity grade for more sensitive applications requiring very low ionic content.
Not sure? Tell us your application and we will help you identify the appropriate grade
Frequently Asked Questions - CorePure Demineralized & Deionized Water
Everything you need to know about DTL Space CorePure Demineralized & Deionized Water, its purity, production, handling and applications.
What Is Deionized Water?
Deionized (DI) water is purified water from which dissolved electrically charged minerals and salts known as ions have been substantially removed.
These include calcium, magnesium, sodium, chloride, sulphate and other ionic contaminants commonly found in ordinary water. Removing these ions significantly reduces conductivity and mineral content, making DI water suitable for applications where dissolved minerals can interfere with equipment, processes, performance or product quality.
What Is DTL Space CorePure Demineralized Water?
CorePure is DTL Space’s dependable general industrial DM/DI water grade, developed for applications requiring controlled low-mineral water without the tighter ionic-purity requirements of our PrimePure and UltraPure grades.
It provides a practical and reliable solution for battery maintenance, boilers, cooling systems, equipment rinsing, manufacturing, process water and other general industrial applications where the mineral content of ordinary water may be undesirable.
CorePure gives businesses access to controlled-quality process water without paying for a higher purity level than their application actually requires.
How Is CorePure Demineralized Water Produced?
CorePure is produced through a controlled multi-stage water purification process incorporating demineralization/deionization and appropriate filtration and treatment stages.
Each purification stage performs a specific function, progressively reducing dissolved minerals, salts and other unwanted impurities before the water reaches its required CorePure quality. Quality parameters are monitored to help maintain dependable and consistent water quality between production batches.
What Makes CorePure Demineralized Water Different From Ordinary Purified Water?
Ordinary filtered or purified water may still contain measurable concentrations of dissolved minerals and electrically charged ions.
CorePure is specifically processed to substantially reduce these minerals and maintain controlled low conductivity and low dissolved solids, making it more suitable for industrial applications where ordinary water could contribute to scaling, mineral deposits, contamination or reduced equipment performance.
It is designed as industrial process water not simply water that looks clean.
Is CorePure Demineralized Water The Same As Distilled Water?
No. Distillation and deionization/demineralization are different purification technologies. Distillation primarily purifies water through evaporation and condensation, while demineralization and deionization use ion-exchange processes to remove dissolved electrically charged contaminants.
Both technologies can produce low-mineral water, but the appropriate choice should be determined by the required water specification and intended application rather than by the purification method alone.
Is CorePure Demineralized Water The Same As RO Water?
No. Reverse Osmosis (RO) is an effective purification technology, but RO water can still contain residual dissolved minerals and ions.
CorePure undergoes additional demineralization/deionization and controlled treatment to further reduce ionic contaminants.
This provides better control of dissolved minerals than ordinary RO water and makes CorePure suitable for many general industrial applications where reduced mineral content is important.
What Applications Is CorePure Demineralized Water Suitable For?
Depending on the application’s required specification, CorePure may be suitable for:
- Inverter and solar battery maintenance
- Flooded lead-acid battery applications
- Boiler feed and make-up applications where the required specification permits
- Cooling systems and cooling-water applications
- General industrial process water
- Equipment and component rinsing
- Manufacturing and production processes
- Cleaning applications requiring reduced mineral residue
- Technical maintenance operations
- Process preparation requiring low-mineral water
- Industrial systems where scale-forming minerals should be minimized
- Other general applications requiring controlled demineralized or deionized water
Can CorePure Demineralized Water Be Used In Inverter And Solar Batteries?
Yes. CorePure’s low mineral content makes it suitable for appropriate flooded lead-acid battery maintenance, including many inverter and solar battery applications where the manufacturer specifies distilled, demineralized or deionized water of suitable quality.
Using low-mineral water helps prevent unnecessary calcium, magnesium and other dissolved contaminants from being introduced into battery cells.
Always follow the battery manufacturer’s instructions. Water should only be added to batteries designed for topping up and should not be added to sealed or maintenance-free batteries.
Can CorePure Demineralized Water Be Used In Boilers?
CorePure may be suitable for certain boiler feed, make-up and related water applications, depending on the boiler’s operating pressure, design and required feed-water specification. Its low mineral content helps reduce the introduction of scale-forming minerals compared with untreated water.
However, boiler-water requirements vary considerably, and parameters beyond conductivity and TDS may be important. Customers should therefore follow the boiler manufacturer’s or water-treatment specialist’s required specification.
Can CorePure Demineralized Water Be Used In Cooling Systems?
Yes, CorePure can be suitable for many cooling and technical systems where reducing dissolved minerals is beneficial. Lower mineral content can help reduce the introduction of scale-forming substances into the system.
However, cooling-water management may also require control of corrosion, microbiological growth, pH and other parameters.
CorePure should therefore be used as part of the appropriate water-management programme for the specific system.
Can CorePure Demineralized Water Be Used In Laboratories?
CorePure may be suitable for general laboratory cleaning, preliminary rinsing and other non-critical laboratory applications where its specification meets the required water quality.
However, laboratory work can require much tighter control of conductivity, organic contamination, microorganisms and other parameters.
For general laboratory applications requiring higher ionic purity, PrimePure may be more appropriate, while particularly sensitive analytical work may require UltraPure or another specifically validated water specification.
Can CorePure Demineralized Water Be Used For Tissue Culture?
CorePure is not the recommended DTL Space grade for sensitive tissue-culture applications.
Tissue culture can require strict control of ionic contamination, microorganisms, organics, endotoxins and other parameters beyond general demineralization.
Customers conducting tissue-culture work should follow their laboratory’s validated water specification and discuss the required parameters with DTL Space before selecting a grade.
Can CorePure Demineralized Water Be Used In Cosmetics And Skincare Manufacturing?
CorePure may be suitable for certain general manufacturing, equipment cleaning, rinsing and process-support applications within cosmetics and skincare production where its specification is appropriate.
For water that will form an important part of a cosmetic or skincare formulation, tighter water-quality and microbiological requirements may apply. In such cases, PrimePure or another appropriately specified grade may be more suitable.
Manufacturers should always evaluate water against the chemical, microbiological and regulatory requirements of their particular formulation and production process.
Can CorePure Demineralized Water Be Used For Manufacturing And Industrial Processes?
Yes. This is one of CorePure’s primary applications. CorePure is designed for general manufacturing and industrial processes where reducing dissolved minerals can help minimize scaling, mineral deposits, residues or unwanted ionic contamination.
Potential uses include process preparation, equipment rinsing, component cleaning, technical maintenance, cooling-related applications and other operations requiring dependable low-mineral process water. Suitability should always be determined by the water specification required for the particular equipment or process.
Can CorePure Demineralized Water Be Used For Drinking?
No. CorePure is positioned as demineralized/deionized process water for battery, manufacturing, equipment, cooling and other industrial applications, not as packaged drinking water. Industrial process water and drinking water are produced and supplied for different purposes. Low TDS or reduced mineral content alone should not be interpreted as a drinking-water specification.
How Should CorePure Demineralized Water Be Stored?
For best quality:
Keep the container tightly sealed.
Store in a clean, cool environment away from direct sunlight and chemicals.
Avoid unnecessary opening and prolonged exposure to air.
Never return unused water to the original container.
Use clean dispensing equipment and compatible containers.
Proper handling helps preserve the water’s quality after production.
Can I Transfer CorePure Demineralized Water Into Another Container?
Yes, but the receiving container can significantly affect water quality.
For sensitive applications, use a clean, compatible container intended for high-purity water. Containers previously used for detergents, chemicals, drinking water or other substances may introduce ions or contaminants and increase conductivity.
Why Might My Conductivity Reading Differ From DTL Space’s Reading?
Several factors can influence conductivity measurements, including:
- Meter accuracy and calibration
- Temperature and temperature compensation
- Sample container cleanliness
- Exposure to air
- Sampling technique
- Probe contamination
- Storage duration and conditions
For meaningful comparison, testing should be performed using calibrated equipment and appropriate high-purity-water sampling procedures.
Does CorePure Demineralized Water Leave Mineral Deposits Or Scale?
CorePure contains significantly lower concentrations of the dissolved minerals commonly associated with scale and mineral residue than ordinary untreated water.
As a result, it can substantially reduce the amount of scale-forming minerals introduced into appropriate equipment and industrial processes.
However, no process water should be assumed to completely prevent scaling under every operating condition. Temperature, concentration cycles, system chemistry and other factors can also influence scale formation.
Is Every DM Or DI Water On The Market The Same?
No. The terms demineralized water and deionized water do not mean that every product has the same purity or performance. Final water quality can vary according to source-water quality, pretreatment, purification technology, ion-exchange resin condition, system operation, equipment maintenance, storage, packaging, handling and quality monitoring.
Two products carrying similar names may therefore have substantially different conductivity and dissolved mineral levels.
Customers should evaluate actual specifications and suitability for their application, rather than purchasing based on the DM or DI name alone.
What Makes CorePure Demineralized Water Different From PrimePure and UltraPure?
DTL Space provides different purity grades because not every industrial application requires the same level of water quality. CorePure is our dependable general industrial grade, designed for applications requiring controlled low-mineral DM/DI water without the tighter ionic-purity requirements of our higher grades.
PrimePure provides a higher level of purity and lower conductivity for more demanding battery, laboratory, cosmetic, testing, manufacturing and industrial applications. UltraPure is our highest-purity grade, intended for applications requiring exceptionally low ionic contamination and tighter purity control. This graded approach allows customers to select water based on what their process actually requires, rather than unnecessarily paying for a purity level they do not need.
Why Choose DTL Space CorePure Demineralized Water?
CorePure is designed for businesses and professionals who need dependable, controlled-quality DM/DI water for everyday industrial and technical applications without unnecessarily paying for ultra-high purity. DTL Space combines multi-stage purification, demineralization/deionization, controlled processing, quality monitoring and careful handling to provide reliable process water for demanding operations.
CorePure delivers what general industrial applications need: controlled mineral content, dependable quality, practical performance and cost-effective supply. Our approach goes beyond supplying clean water, we focus on delivering the right level of purity for the process that depends on it.
NEED HIGH-PURITY WATER YOU CAN ORDER WITH CONFIDENCE?
Tell us your application, quantity and location. Our team will help you determine whether CorePure is appropriate for your requirement and arrange supply.
